These cranes are typically double girder overhead cranes that can be customized to accommodate various lifting needs, such as using a grab bucket or a magnet for different types of materials.

QP type grab electromagnetic double-girder bridge crane has both a grab and an electromagnetic sucker. The electromagnetic sucker mainly uses the 

electromagnetic principle to transport steel objects, and the main part is a magnet. When the current is turned on, the electromagnet will firmly attract the 

steel object and lift it to the designated place. Cut off the current, the magnetism disappears, and the steel item is put down. 

The electromagnetic crane can generate a strong magnetic force, and dozens of tons of iron sheets, iron wires, iron nails, scrap iron and other iron materials 

can be easily collected and transported without packing, packing or bundling. The crane is equipped with safety protection devices and batteries, which can be

maintained for about half an hour after a power outage to avoid accidents.

The crane is also equipped with a grab, which can be used to grab scraps and other objects. Therefore, this type of crane can meet the two work occasions of 

grabbing and adsorbing steel waste, and has a wide range of applications.

Grab,Bucket,Grapple open direction is divided into parallel and vertical with main beam.The winch trolley wiht Magnet,Magnetic, Electromagnetic Chuck and 

the grab can be double or four wire rope, mechanical or electric hydraulic type according to different work duty and materials.

Main girder

1. Steel plant material Q235B/Q345B

2. CNC Cutting for complete steel plant.

3. Epoxy zinc-rich painting.

Cab

1. High strength frame.

2. The decoration is made of medium density board and aluminum plastic plate or with thin steel plant riveting.

Trolley

1. Final drives gears are made with heat-treated carbon steel offering greater strength.

Grab bucket and magnet

1. Capacity: 5/5t-16/16t

2. Grab Type: Two-lobe grab, four-lobe grab

Cable drum 

1. Good winding characteristics, the reel shaft output constant torque.

Main Features of QZ model overhead crane:

1.Grab electromagnetic dual-purpose bridge crane operating room is separated and closed.

2. The entrance of the control room platform of the crane is divided into three types: side surface, end surface and top surface.

3.Added height for cart bumpers. 4. Grab electromagnetic dual-purpose bridge cranes are divided into indoor and indoor types. When ordering, the technical requirements such as the maximum and minimum temperature of the working environment and the type of power supply should be indicated.

5. An overload limiter, a large-screen display and various protection devices are added, which further increases the safety during use.

Safety System

1. Overload protection in the event of overload, the hoist unit switches off and only the lowering motion is possible;

2. Long and cross travel limited by means of preliminary and final limit switches or Wireless anti-collision device;

3. Anti-falling protection for the Three-in-One electric motor of trolley and crane prevents from accidental falling;

4. All movements can be switched off by actuating the emergency-off switch at the control station via a main contact;

5. High quality long time bearing polyurethane materials buffer fixed at the end of trolley travelling and crane travelling to

prevent over traveling;

6. Safety hook latch used for avoiding the lifted material out off from the hook;

7. Audible and visual alarm device to inform the person stay near by the travelling crane;

8. Rain Cover for lifting mechanism of outdoor cranes, electric cabinet and driving mechanism;

9. Protective earth conductor is fitted as standard;

10. Voltage lower protection system;

11. Current overload protection system;